MAXIMUM EFFICIENCY CARBIDE BANDSAW BLADE FOR VERY HIGH-SPEED CUTTING ON LARGE SIZED ALUMINUM PLATES
CHARACTERISTICS
APPLICATIONS
ADVANTAGES
WIDTH X THICKNESS |
TPI (TEETH PER INCH) |
||||||||
| mm | inch | 3,0/4 | 2,0/3 | 1,4/2 | 1,4/2 | 1,3/1 | 1,3/1 | 0,7/1 | 0,7/1 |
| 34 x 1,1 | 1-3/8 x 0,042 | HS8 | HS8 | ||||||
| 41 x 1,3 | 1-5/8 x 0,050 | HS8 | HS8 | ||||||
| 54 x 1,3 | 2-1/8 x 0,050 | HS8 | |||||||
| 54 x 1,6 | 2-1/8 x 0,063 | HS10 | HS13 | HS10 | HS13 | ||||
| 67 x 1,6 | 2-5/8 x 0,063 | HS10 | HS13 | ||||||
| 80 x 1,6 | 3-1/8 x 0,063 | HS10 | HS13 | HS10 | HS13 | ||||
CONTACT LENGTH mm |
100-220 | 180-600 | 220-600 | 300-800 | 600-2000 | 800-2500 | 1000-2700 | 1000-3000 | |
CT-APEX® ALU-HS |
|
| Construction steel, Automatic steel |  |
| Carbon steel | |
| Hardened and tempered steel | |
| Hardened and tempered steel over 1200 N/mm2 | |
| Case-hardened steel, Spring steel | |
| Bearing steel | |
| Hot tool steel | |
| Cold tool steel | |
| High-speed steel | |
| Ferritic stainless steel | |
| Austenitic stainless steel | |
| Martenistic stainless steel | |
| Duplex and heat-resistant steel | |
| Cast iron | |
| Nickel alloys | |
| Titanium alloys | |
| Aluminum alloys |  |
| Copper alloys | |
| Aluminum bronze |  |
advised
suited
allowed
not expected
