CARBIDE BANDSAW BLADE DEVELOPED FOR CUTTING TEMPERED OR CHROME PLATED RODS AND STEEL WITH SURFACE TEMPERING
CHARACTERISTICS
APPLICATIONS
ADVANTAGES
WIDTH X THICKNESS |
TPI (TEETH PER INCH) |
||
mm | inch | 3,0/4 | 2,0/3 |
34 x 1,1 | 1-5/8 x 0,050 | HRC | |
41 x 1,3 |
2-1/8 x 0.063 | HRC | HRC |
54 x 1.6 | 2-1/8 x 0.063 | HRC | HRC |
CONTACT LENGTH mm |
30-150 | 150-300 |
CT-PRIME® HRC (COATED) |
CT-APEX® HRC (UNCOATED) |
|
Construction steel, Automatic steel | ![]() |
![]() |
Carbon steel | ![]() |
![]() |
Hardened and tempered steel | ![]() |
![]() |
Hardened and tempered steel over 1200 N/mm2 | ![]() |
![]() |
Case-hardened and Spring steel | ![]() |
![]() |
Bearing steel | ![]() |
![]() |
Hot tool steel | ![]() |
![]() |
Cold tool steel | ![]() |
![]() |
High-speed steel | ![]() |
![]() |
Ferritic stainless steel | ![]() |
![]() |
Austenitic stainless steel | ![]() |
![]() |
Martenistic stainless steel | ![]() |
![]() |
Duplex and heat-resistant steel | ![]() |
![]() |
Cast iron | ![]() |
![]() |
Nickel alloys | ![]() |
![]() |
Titanium alloys | ![]() |
![]() |
Aluminum alloys | ![]() |
![]() |
Copper alloys | ![]() |
![]() |
Aluminum bronze | ![]() |
![]() |
advised
suited
allowed
not expected