CARBIDE BANDSAW BLADE FOR STRAIN-HARDENED, DIFFICULT TO CUT MATERIALS; INTENDED FOR THE AEROSPACE, ENERGY, OIL AND GAS, CHEMICAL AND PETROCHEMICAL SECTORS
CHARACTERISTICS
APPLICATIONS
ADVANTAGES
WIDTH X THICKNESS |
TPI (TEETH PER INCH) |
|||
| mm | inch | 2,0/3 | 1,4/2 | 1,3/1 |
| 41 x 1,3 | 1-5/8 x 0,050 | HRSA | ||
| 54 x 1,3 | 2-1/8 x 0,050 | HRSA | HRSA | |
| 54 x 1,6 | 2-1/8 x 0,063 | HRSA | HRSA | |
| 67 x 1,6 | 2-5/8 x 0,063 | HRSA | HRSA | HRSA |
| 80 x 1,6 | 3-1/8 x 0,063 | HRSA | HRSA | |
CONTACT LENGTH mm |
120-250 | 250-400 | 400-800 | |
CT-PRIME® HRSA (COATED) |
CT-APEX® HRSA (UNCOATED) |
|
| Construction steel, Automatic steel |  |
|
| Carbon steel | |
|
| Hardened and tempered steel | |
|
| Hardened and tempered steel over 1200 N/mm2 | |
 |
| Case-hardened steel, Spring steel | |
|
| Bearing steel | |
|
| Hot tool steel | |
|
| Cold tool steel | |
|
| High-speed steel | |
|
| Ferritic stainless steel | |
|
| Austenitic stainless steel |  |
|
| Martenistic stainless steel | |
|
| Duplex and heat-resistant steel | |
|
| Cast iron |  |
|
| Nickel alloys | |
|
| Titanium alloys | |
|
| Aluminum alloys | |
|
| Copper alloys | |
|
| Aluminum bronze | |
|
advised
suited
allowed
not expected
