VX-SERIES CARBIDE BAND SAW BLADE WITH MINIMAL MATERIAL REMOVAL RESISTANCE, FOR HARD MATERIALS THAT ARE DIFFICULT TO CUT EVEN WITH PROPERLY EQUIPPED MACHINES, UP TO 1800 N/mm²
WIDTH x THICKNESS |
TEETH PER INCH (TPI) |
|||||
| mm | inch | 2,0/3 | 1,4/2 | 1,4/6 | 1/1,3 | 0,8/1 |
| 54 x 1.6 | 2-1/8 x 0.063 | • | • | |||
| 67 x 1.6 | 2-5/8 x 0.063 | • | • | |||
| 80 x 1.6 | 3-1/8 x 0.063 | • | • | • | ||
CONTACT LENGTH (mm) |
150-300 | 300-500 | 300-600 | 500-800 | 800-1500 | |
CT-SIGMA® S-VX |
CT-SIGMA® H-VX |
CT-SIGMA® P-VX |
CT-SIGMA® M-VX |
|
| Construction steel, Automatic steel |  |
|
 |
|
| Carbon steel | |
|
|
|
| Hardened and tempered steel | |
|
 |
|
| Hardened and tempered steel over 1200 N/mm2 | |
|
|
|
| Case-hardened steel, Spring steel | |
|
|
|
| Bearing steel | |
|
|
|
| Hot tool steel | |
|
|
|
| Cold tool steel | |
|
|
|
| High-speed steel | |
|
|
|
| Ferritic stainless steel | |
|
|
|
| Austenitic stainless steel | |
|
|
|
| Martenistic stainless steel | |
|
|
|
| Duplex and heat-resistant steel | |
|
|
|
| Cast iron | |
|
|
|
| Nickel alloys | |
|
|
|
| Titanium alloys | |
|
|
|
| Aluminum alloys |  |
|
|
|
| Copper alloys | |
|
|
|
| Aluminum bronze | |
|
|
|
advised
suited
allowed
not expected
'/%3E%3C/svg%3E){kind=small}
