HIGH-PERFORMANCE BI-METAL BANDSAW BLADE FOR CUTTING FERROUS AND NON-FERROUS METAL WITH A TENSILE STRENGTH OVER 1000 N/mm²
CHARACTERISTICS
APPLICATIONS
ADVANTAGES
WIDTH X THICKNESS |
TPI (TEETH PER INCH) |
|||||||
| mm | inch | 5,0/8 | 4,0/6 | 3,0/4 | 2,0/3 | 1,4/2 | 1/1,3 | 0,8/1,3 |
| 27 x 0,9 | 1-1/16×0,035 | PS | PS | PS | HPS | |||
| 34 x 1,1 | 1-3/8×0,042 | PS | PS | HPS | ||||
| 41 x 1,3 | 1-5/8×0,050 | PS | PS | HPS | HPS | |||
| 54 x 1,6 | 2-1/8 x 0,063 | PS | HPS | HPS | HPS | |||
| 67 x 1,6 | 2-5/8 x 0,063 | HPS | HPS | HPS | HPS | |||
| 80 x 1,6 | 3-1/8 x 0,063 | HPS | HPS | HPS | ||||
CONTACT LENGTH mm |
40-80 | 60-100 | 90-150 | 140-300 | 250-500 | 350-750 | 600-1200 | |
X-PATH® SHS |
X-PATH® THS |
X-PATH® FHS |
|
| Construction steel, Automatic steel | |||
| Carbon steel |  |
|
|
| Hardened and tempered steel | |
 |
 |
| Hardened and tempered steel over 1200 N/mm2 | |
|
|
| Case-hardened steel, Spring steel | |
|
|
| Bearing steel | |
|
|
| Hot tool steel | |
|
|
| Cold tool steel | |
|
|
| High-speed steel | |
|
|
| Ferritic stainless steel | |
|
|
| Austenitic stainless steel | |
|
|
| Martensitic stainless steel | |
|
|
| Duplex and heat-resistant steel | |
|
|
| Cast iron | |
|
|
| Nickel alloys |  |
|
|
| Titanium alloys | |
|
|
| Aluminum alloys | |
|
|
| Copper alloys | |
|
|
| Aluminum bronze | |
|
|
advised
suited
allowed
not expected
