WIDTH x THICKNESS |
TPI (TEETH PER INCH) |
|
||||||
| mm | inch | 3,0/4 | 2,0/3 | 1,4/2 | 1,4/1,6 | 1,3/1 | 0,8/1 | 0,65/0,85 |
| 34 x 1,1 | 1-3/8 x 0,042 | • | • | • | ||||
| 41 x 1,3 | 1-5/8 x 0,050 | • | • | • | ||||
| 54 x 1,3 | 2-1/8 x 0,050 | • | • | • | ||||
| 54 x 1,6 | 2-1/8 x 0,063 | • | • | • | • | |||
| 67 x 1,6 | 2-5/8 x 0,063 | • | • | • | • | |||
| 80 x 1,6 | 3-1/8 x 0,063 | • | • | • | • | |||
CONTACT LENGTH mm |
60-150 | 150-300 | 300-500 | 300-600 | 500-800 | 800-1500 | 800-2000 | |
CT-PRIME® S-TH |
CT-PRIME® P-TH |
CT-PRIME® HLO |
|
| Construction steel, Automatic steel |  |
 |
|
| Carbon steel | |
|
|
| Hardened and tempered steel | |
|
|
| Hardened and tempered steel over 1200 N/mm2 | |
 |
 |
| Case-hardened steel, Spring steel | |
|
|
| Bearing steel | |
|
|
| Hot tool steel | |
|
|
| Cold tool steel | |
|
|
| High-speed steel | |
|
|
| Ferritic stainless steel | |
|
|
| Austenitic stainless steel | |
|
|
| Martenistic stainless steel | |
|
|
| Duplex and heat-resistant steel | |
|
|
| Cast iron | |
|
|
| Nickel alloys | |
|
|
| Titanium alloys | |
|
|
| Aluminum alloys | |
|
|
| Copper alloys | |
|
|
| Aluminum bronze | |
|
|
advised
suited
allowed
not expected
