HIGH PERFORMANCE BI-METAL BANDSAW BLADE FOR METAL PROFILES AND TUBES, AS WELL AS ON SOLID SECTIONS OF HIGH STRENGTH STEEL UP TO 1600 N/mm²
CHARACTERISTICS
APPLICATIONS
ADVANTAGES
WIDTH X THICKNESS |
TPI (TEETH PER INCH) |
|||
| mm | inch | 4,0/6 | 3,0/4 | 2,0/3 |
| 20 x 0,9 | 1/3,8 x 0,042 | BAS | BAS | BAS |
| 41 x 1,3 | 1-5/8 x 0,050 | BAS | BAS | BAS |
| 54 x 1,3 | 2-1/8 x 0,050 | BAS | BAS | |
| 54 x 1,6 | 2-1/8 x 0,063 | BAS | BAS | BAS |
| 67 x 1,6 | 2-5/8 x 0,063 | BAS | BAS | |
CONTACT LENGTH mm |
60-100 | 90-150 | 140-30 | |
M42 BACKPRO SW-PRIME |
M42 BACKPRO SW |
|
| Construction steel, Automatic steel |  |
|
| Carbon steel | |
|
| Hardened and tempered steel |  |
 |
| Hardened and tempered steel over 1200 N/mm² | |
|
| Case-hardened steel, Spring steel | |
|
| Bearing steel | |
|
| Hot tool steel | |
|
| Cold tool steel | |
|
| High-speed steel | |
|
| Ferritic stainless steel | |
|
| Austenitic stainless steel | |
|
| Martensitic stainless steel | |
|
| Duplex and heat-resistant steel |  |
|
| Cast iron | |
|
| Nickel alloys | |
|
| Titanium alloys | |
|
| Aluminum alloys | |
|
| Copper alloys | |
|
| Aluminumbronze | |
|
advised
suited
allowed
not expected
